Dell 2208WFP Monitor User Manual

Page 17

Advertising
background image

Nature Mode

Mode suitable for nature scenes.

Hue
 

User Preset: Use the plus and minus buttons to increase or decrease each of the three colors (R, G, B) independently, in single digit
increments, from 0 to 100.

makes video image shade into greenish

makes video image shade into purplish

NOTE:

Hue adjustment only available for video input.

Saturation
 

This feature can make color shift of video image to green or purple. This is used to adjust for desired flesh tone color. Use - or + to
adjust the hue from '0' to '100'.

makes video image looks more monochrome

makes video image looks more colorful

 

NOTE:

Saturation adjustment only available for video input.

 

Exit Menu

Push

to exit the OSD main menu.

DISPLAY
SETTINGS

 

 

 

Display
Setting  
submenu

Display Setting  submenu for VGA input

Display Setting  submenu for DVI

-D input

 

Back

Push

to go back to the main menu.

Horizontal Po
sition

Use the

and

buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).

NOTE:

When using DVI source, the Horizontal Position setting is not available.

Vertical Posit
ion

Use the

and

buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).

NOTE:

When using DVI source, the Vertical Position setting is not available.

Sharpness

This feature can make the image look sharper or softer.

Use  

and

buttons to adjust the sharpness from '0' to '100'.

 

 

Pixel Clock
 

 

 

The Pixel Clock and Phase adjustments allow you to adjust your monitor to your preference. These settings are accessed through the
main OSD menu, by selecting 'Display Settings'.

Use the

and

buttons to adjust for best image quality.

Phase

If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase
(fine), again.

NOTE:

Pixel Clock and Phase Adjustments are only available for "VGA" input.

 

Display Info

All the settings related to this monitor.

 

Display Reset Reset the image to the original factory setting.

 

Exit Menu

Push

to exit the OSD main menu.

OTHER
SETTINGS

 

 

Advertising