Dell Inspiron One 19 (Mid 2009) - Manual (Page 33)

Back to Contents Page
I/O Cover
Dell™ Inspiron™ One 19 Service Manual
Removing the I/O Cover
Replacing the I/O Cover
Removing the I/O Cover
1. Follow the procedures in Before You Begin .
2. Place the computer face down on a flat surface.
3. Lift the computer stand to access the I/O cover.
4. Using your fingers, press the two securing clips at the bottom of the I/O cover and lift the I/O cover to release the latches on the I/O cover from the
slots on the back cover.
5. Pull the I/O cover out of the computer.
Replacing the I/O Cover
1. Follow the procedures in Before You Begin .
2. Align the three tabs on the I/O cover with the slots on the back cover.
3. Press the two securing clips at the bottom of the I/O cover and gently ease the two latches into the slots on the back cover to secure the I/O cover.
4. Connect your computer and all attached devices to electrical outlets, and turn them on.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the I/O cover.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: Ensure that sufficient space exists to support the system with the computer cover removed—at least 30 cm (1 ft.) of desk top space.
CAUTION: Before opening your computer, ensure that you place the computer on a soft cloth or clean surface to avoid any scratches on the
display.
1 securing clips (2) 2 I/O cover