Dell Inspiron One 2020 (Early 2012) - Manual (Page 25)

Optical Drive | 25
8 Optical Drive
WARNING: Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 11.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Removing the Optical Drive
Prerequisites
1 Remove the stand cover. See "Removing the Stand Cover" on page 15.
2 Remove the stand. See "Removing the Stand" on page 17.
3 Remove the back cover. See "Removing the Back Cover" on page 19.
Procedure
1 Disconnect the power and data cable from the connector on the
optical-drive assembly.
2 Remove the screw that secures the optical-drive assembly to the chassis.
3 Slide the optical-drive assembly out of the optical-drive bay.
1 power and data cable 2 optical-drive assembly
3 screw
1
3
2
book.book Page 25 Monday, April 16, 2012 3:04 PM