Dell Latitude D620 ATG - Manual (Page 37)

2. Insert the battery into the battery bay (see Before Working Inside Your Computer ).
3. Connect the AC adapter to the computer and to an electrical outlet.
4. Turn on the computer.
5. Insert the CD that accompanied the replacement system board into the appropriate drive and flash the system BIOS (see Flashing the BIOS ). Follow the
instructions on the screen.
Back to Contents Page
NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
damage to the computer.
NOTE: After replacing the system board, use the CD that accompanied the replacement system board to enter the computer Service Tag into the BIOS.