Dell PowerEdge 2850 - Manual (Page 6)

Table B-1. Supported Escape Sequences
After creating macros for the keys listed in Table B -1 , press <F1> on the client system's keyboard during terminal emulation to send the escape sequence
<Esc><O><P> to the host system. The host system then interprets the sequence as <F1>.
Additional escape sequences may be required by certain utilities or functions on the host system. Create macros for the additional sequences listed in Table B -
2 .
Table B-2. Additional Escape Sequences
NOTE: When creating macros in HyperTerminal, press <Insert> before <Esc> to signify that you are sending an escape sequence rather than escaping
out of the dialog box. If you do not have this function, you must upgrade HyperTerminal.
NOTE: Escape-sequence key combinations listed in Table B -1 are case-sensitive. For example, to generate the character <A> you must press
<Shift><a>.
Key(s) Supported Sequence Terminal Emulation
<Up arrow> <Esc><[><A> VT 100/220, ANSI
<Down arrow> <Esc><[><B> VT 100/220, ANSI
<Right arrow> <Esc><[><C> VT 100/220, ANSI
<Left arrow> <Esc><[><D> VT 100/220, ANSI
<F1> <Esc><O><P> VT 100/220, ANSI
<F2> <Esc><O><Q> VT 100/220, ANSI
<F3> <Esc><O><R> VT 100/220, ANSI
<F4> <Esc><O><S> VT 100/220, ANSI
<F5> <Esc><O><T> VT 100, ANSI
<F6> <Esc><O><U> VT 100, ANSI
<Esc><[><1><7><~> VT 100/220
<F7> <Esc><O><V> VT 100, ANSI
<Esc><[><1><8><~> VT 100/220
<F8> <Esc><O><W> VT 100, ANSI
<Esc><[><1><9><~> VT 100/220
<F9> <Esc><O><X> VT 100, ANSI
<Esc><[><2><0><~> VT 100/220
<F10> <Esc><O><Y> VT 100, ANSI
<Esc><[><2><1><~> VT 100/220
<F11> <Esc><O><Z> VT 100, ANSI
<Esc><[><2><3><~> VT 100/220
<F12> <Esc><O><A> VT 100, ANSI
<Esc><[><2><4><~> VT 100/220
<Home> <Esc><[><1><~>
<Esc><h> VT 220
ANSI
<End> <Esc><[><4><~> VT 220
<Esc><k> ANSI
<Delete> <Esc><[><3><~> VT 220
<Esc><–> ANSI
<Delete> <Esc><[><3><~> VT 220
<Esc><–> ANSI
<Page Up> <Esc><[><5><~> VT 220
<Esc><Shift><?> ANSI
<Page Down> <Esc><[><6><~> VT 220
<Esc></> ANSI
<Shift><Tab> <Esc><[><Z> VT 100
<Esc><[><0><Z> VT 220
<Esc><[><Shift><z> ANSI
NOTE: Escape-sequence key combinations listed in Table B -2 are case-sensitive. For example, to generate the character <A> you must press
<Shift><a>.
Key(s) Supported Sequence
<Ctrl><Alt><Del>
(Reboot host system) <Esc><R><Esc><r><Esc><R>
<Alt><x> <Esc><X><X>