Replacing the solid-state drive, Procedure, Post-requisites – Dell XPS 13 (9343, Early 2015) User Manual
Page 22
Replacing the Solid-State
Drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling
the hard drive.
Procedure
1
Align the notches on the solid-state drive with the tabs in the solid-state
drive slot.
2 Slide the solid-state drive at an angle into the solid-state drive slot.
3 Press the other end of the solid-state drive down and replace the screw
that secures the solid-state drive to the system board.
Post-requisites
1
Replace the
2 Replace the
22