Dell Alienware M14x (Early 2011) - Manual (Page 86)

CHAPTER 5: TROUBLESHOOTING
84
During the assessment, answer any questions that appear.
If a failure is detected, the computer stops and beeps. To stop the assessment and •
restart the computer, press <n>; to continue to the next test, press <y>; to retest the
component that failed, press <r>.
If failures are detected during the Enhanced Pre-boot System Assessment, write down
•
the error code(s) and contact Alienware (for more information, see “Contacting Alienware“
on page 117).
If the Enhanced Pre-boot System Assessment completes successfully, the following message
appears “
Do you want to run the remaining memory tests? This will take
about 30 minutes or more. Do you want to continue? (Recommended).”
If you are experiencing memory issues, press <y>, otherwise press <n>. The following message
is displayed: “
Enhanced Pre-boot System Assessment complete.”
Press <o> to reboot your computer.