Dell POWEREDGE R720XD - Manual (Page 4)

Enabling DPAT Using DTK
Run the following command to enable DPAT using DTK:
Syscfg -controlledturbo=enable
Disabling DPAT Using DTK
Run the following command to disable DPAT using DTK:
Syscfg -controlledturbo=disable
____________________
© 2013 Dell Inc.
Trademarks used in this text: Dell™, the DELL logo, and PowerEdge™ are trademarks of Dell Inc.
Intel
® is a registered trademark of Intel Corporation in the U.S. and other countries.
Pro.fm Page 12 Tuesday, March 5, 2013 3:27 PM