Dell S2340T Multi Touch Monitor - Manual (Page 15)

DP_PWR Return
10 ML3(p) 20 +3.3 V DP_PWR
9 TMDS DATA 0- 19 HOT PLUG DETECT
10 TMDS CLOCK
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID)
using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different
settings if desired. For more information about changing the monitor settings, see Operating the Monitor .
Universal Serial Bus (USB) Interface
This section gives you information about the USB ports that are available on the left side of your monitor.
NOTE: The USB ports on this monitor are USB 3.0 compliant.
Transfer speed Data
Rate
Power Consumption
SuperSpeed 5 Gbps 4.5 W (Max., each port)
Hi-Speed 480 Mbps 2.5 W (Max., each port)
Full speed 12 Mbps 2.5 W (Max., each port)
Low speed 1.5 Mbps 2.5 W (Max., each port)
USB Upstream
Connector
USB Downstream
Connector
Pin Number Signal Name
1 VBUS
2 D-
3 D+
4 GND
Pin Number Signal Name
1 VBUS
2 D-
3 D+
4 GND