Internal card with bluetooth® wireless technology, Removing the card, Replacing the card – Dell XPS M170 (MXG051, Late 2005) User Manual
Page 9
Back to Contents Page
Internal Card With Bluetooth® Wireless Technology
Dell™ XPS M170 Service Manual
Removing the Card
1.
Follow the instructions in "
Before Working Inside Your Computer
."
2.
Remove the M2.5 x 8-mm screw and remove the card cover from the computer.
3.
Pull the card out of the compartment so that you can disconnect the card from its cable and remove it from the computer.
Replacing the Card
1.
Connect the card to the cable and then carefully insert the card into the compartment.
2.
Replace the card cover and the screw.
3.
Replace the battery.
Back to Contents Page
CAUTION:
Before you begin the following procedure, see the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
NOTE:
If you ordered an internal card with Bluetooth wireless technology with your computer, the card is already installed.
1 card connector
2 internal card with Bluetooth wireless technology
3 card door
4 M2.5 x 8-mm screw