Dell PowerEdge 7150 - Manual (Page 2)

Back to Contents Page
Technical Specifications
Dell™ PowerEdge™ 7150 Systems User's Guide
Table A-1. Technical Specifications
Microprocessor
Microprocessor type one to four Intel 64-bit Intel ® Itanium™ microprocessors with a minimum internal operating frequency of 733 MHz and an external
operating frequency of 133 MHz
Front side bus speed 133 MHz (266 MHz double-pumped)
Internal cache 2- or 4-MB L3 cache
Expansion Bus
Bus type 64-bit PCI
Expansion slots Eight 66-MHz hot-pluggable slots on six PCI buses; two 33-MHz slots on a seventh PCI bus
Memory
Architecture registered PC-100-compliant DIMMs with CL2 timing
Memory module sockets 32 sockets per memory board; one or two memory boards
Memory module capacities 128-MB, 256-, or 512-MB; or 1-GB (when available)
Minimum RAM 1 GB
Maximum RAM 64 GB (when 1-GB memory modules are available)
Drives
Diskette drive one IDE diskette drive
Tape drive optional external tape drive
SCSI devices up to four 1-inch, internal, hot-pluggable Ultra3 SCSI hard-disk drives
CD-ROM drive one IDE CD-ROM drive
Ports and Connectors
Externally accessible:
Serial (DTE) two 9-pin connectors; 16550-compatible
Parallel one 25-pin connector (bidirectional)
Video one 15-pin connector
PS/2-style keyboard 6-pin mini-DIN connector
PS/2-compatible
mouse 6-pin mini-DIN connector
USB two USB-compliant 4-pin connectors
NIC RJ45 connector for integrated NIC
SCSI One 68-pin Ultra3 SCSI connector
ICMB (Not supported)
Internally accessible:
IDE channels two 40-pin connectors
SCSI channels two 68-pin Ultra3 SCSI connectors
Video
Video type ATI Rage 128 XL video controller; VGA connector
Video memory (standard) 8 MB
Power1
DC power supply:
Wattage four 800 W power supplies in a 3 +1 redundant configuration
Voltage 200-240V, 50/60 Hz
optional 100-240V, 50/60 Hz
System battery CR2032 3.0-V lithium coin cell