Dell Inspiron 6000 - Manual (Page 62)

62
Solving Problems
Memory Problems
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
Network Problems
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
I F YOU RECEIVE AN INSUFFICIENT MEMORY MESSAGE —
• Save and close any open files and exit any open programs you are not using to see if that resolves
the problem.
• See the software documentation for minimum memory requirements. If necessary, install additional
memory. See page 79.
• Reseat the memory modules to ensure that your computer is successfully communicating with the
memory. See page 79.
• Run the Dell Diagnostics. See page 51.
I F YOU EXPERIENCE OTHER MEMORY PROBLEMS —
• Reseat the memory modules to ensure that your computer is successfully communicating with the
memory. See page 79.
• Ensure that you are following the memory installation guidelines. See "Memory" on page 79.
• Run the Dell Diagnostics. See "Dell Diagnostics" on page 51.
C HECK THE NETWORK CABLE CONNECTOR — Ensure that the network cable is firmly inserted into
both the network connector on the back of the computer and the network jack.
C HECK THE NETWORK LIGHTS ON THE NETWORK CONNECTOR — No light indicates that no network
communication exists. Replace the network cable.
R ESTART THE COMPUTER AND LOG ON TO THE NETWORK AGAIN
C HECK YOUR NETWORK SETTINGS — Contact your network administrator or the person who set up
your network to verify that your network settings are correct and that the network is functioning.