Osd warning messages – Dell S2209WFP Monitor User Manual
Page 20
OSD Warning Messages
LCD Conditioning
Factory Reset
Back
If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention. Using the LCD Conditioning feature may take
several hours. Severe cases of image retention are known as burn-in, the LCD Conditioning feature does not remove burn-in.
Reset all OSD settings to the factory preset values.
Push
to go back to or exit the main menu.
When the monitor does not support a particular resolution mode you will see the following
message :
or
This means that the monitor cannot synchronize with the signal that it is receiving from the
computer. See
Monitor Specifications
for the Horizontal and Vertical frequency ranges addressable
by this monitor. The recommended mode is 1920 X 1080.
When monitor enters Power Save mode, the following message appears :