Dell S2209WFP Monitor - Manual (Page 8)

Physical Characteristics
Environmental
Video input signals
Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input
impedance
Digital DVI-D TMDS, 600mV for each differential line, positive
polarity at 50 ohm input impedance
Synchronization input signals
Separate horizontal and vertical synchronizations, polarity-free
TTL level, SOG (Composite SYNC on green)
AC input voltage/frequency/current 100 to 240 VAC/50 or 60 Hz + 3 Hz/2.0A (Max.)
Inrush iso surge current
110 V: 30 A (Max.)
220 V: 60 A (Max.)
Connector type
l D-sub: blue connector
l DVI-D: white connector
Signal cable type
l D-sub: Detachable, Analog, 15pin, shipped attached to
the monitor
l DVI-D (Optional): Detachable, Digital, 24pin, shipped
detached from the monitor
Dimensions (with stand)
Height 384.36 mm (14.990 inches)
Width 522.24 mm (20.560 inches)
Depth 222.635 mm (8.765 inches)
Dimensions (without stand)
Height 313.71 mm (12.351 inches)
Width 522.24 mm (20.561 inches)
Depth 63.36 mm (2.494 inches)
Stand dimensions
Height 285 mm (11.22 inches)
Width 222.6 mm (8.764 inches)
Depth 222.6 mm (8.764 inches)
Weight
Weight with packaging 7.20 kg ( 15.876 lb)
Weight of Monitor and Stand Assembly 4.98 kg ( 10.98 lb)
Weight without stand assembly
(For wall mount or VESA mount considerations -
no cables)
3.84 kg ( 8.47 lb)
Weight of stand assembly 1.14 kg (2.51 lb)
Temperature
Operating 0° to 40° C (32° to 104°F)
Non-operating
Storage: 0° to 60° C (32° to 140° F)
Shipping: -20° to 60° C (-4° to 140° F)
Humidity
Operating 10% to 80% (non-condensing)
Non-operating
Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90% (non-condensing)
Altitude
Operating 3,657.60 m (12,000 ft) max
Non-operating 12,192 m (40,000 ft) max
Thermal dissipation
154 BTU/hour (maximum)
119 BTU/hour (typical)