Dell B1165nfw Multifunction Mono Laser Printer - Manual (Page 96)

96 4. Troubleshooting
Understanding the status LED
The color of the LED indicates the machine's current status.
• Some LEDs may not be available depending on model or country (see "Control panel overview" on page 21).
• To resolve the error, look at the error message and its instructions from the troubleshooting part (see "Understanding display messages" on page 98).
• You also can resolve the error with the guideline from the computers’s Dell Printing Status or Smart Panel program window (see "Using Dell Printer Status" on
page 251 ).
• If the problem persists, call a service representative.
LED Status Description
Status
Off The machine is off-line.
Green
Blinking When the backlight blinks, the machine is receiving or printing data.
On • The machine is on-line and can be used.
Red
Blinking
• A minor error has occurred and the machine is waiting for the error to be cleared. Check the display message. When the problem
is cleared, the machine resumes.
• Small amount of toner is left in the cartridge. The estimated cartridge life a of toner is close. Prepare a new cartridge for
replacement. You may temporarily increase the printing quality by redistributing the toner (see "Redistributing toner" on page
72).
b
On
• A toner cartridge has almost reached its estimated cartridge life a . It is recommended to replace the toner cartridge (see
"Replacing the toner cartridge" on page 74).
• The cover is opened. Close the cover.
• There is no paper in the tray when receiving or printing data. Load paper in the tray.
• The machine has stopped due to a major error. Check the display message (see "Understanding display messages" on page 98).
• A paper jam has occurred (see "Clearing paper jams" on page 92).