Riser board removal (midsize chassis): dell, Optiplex, G1 systems – Dell OptiPlex G1 User Manual
Page 57
Advertising
Riser Board Removal (Midsize Chassis): Dell
™
OptiPlex
™
G1 Systems
To remove the riser board, follow these steps:
1.
Remove the expansion-card cage
and
remove all expansion cards
.
2. On a flat work surface, turn the expansion-card cage over so that the riser board faces up.
3. Remove the riser-board mounting screws.
4. Slide the riser board down until it stops; then lift the riser board away from the expansion-card cage.
Advertising