Dell Inspiron Small Desktop (3647, Late 2013) - Manual (Page 42)

42 | Replacing the Processor
Replacing the Processor
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 9. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Procedure
NOTE: A new processor ships with a thermal pad in the package. In some cases, the
processor may ship with the thermal pad attached to it.
1 Unpack the new processor, being careful not to touch the underside of the
processor.
CAUTION: Do not touch the underside of the processor.
CAUTION: You must position the processor correctly in the processor socket to
avoid damage to the processor.
2 If the release lever on the socket is not fully extended, move it to that position.
3 Orient the alignment notches on the processor with the alignment tabs on the
socket.
4 Align the pin-1 corner of the processor with the pin-1 corner of the processor
socket, and then place the processor in the processor socket. Set the processor
lightly in the socket and ensure that the processor is positioned correctly.
book.book Page 42 Monday, November 25, 2013 3:53 PM