Dell Latitude E5410 (Mid 2010) - Manual (Page 32)

Back to Contents Page
Heat Sink
Dell™ Latitude™ E5410 Discrete Service Manual
Removing the Heat Sink
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the battery from the computer.
3. Remove the access panel from the computer.
4. Remove the fan from the computer.
5. Loosen the screws securing the heat sink to the system board.
6. Lift up the heat sink at an angle and remove it from the computer.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.