Dell Latitude E5410 (Mid 2010) - Manual (Page 45)

Back to Contents Page
LED Board
Dell™ Latitude™ E5410 Discrete Service Manual
Removing the LED Board
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the battery from the computer.
3. Remove the LED cover from the computer.
4. Remove the keyboard from the computer.
5. Release the latch securing the LED Board cable.
6. Disconnect the LED Board cable.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.