Dell PowerEdge C6220 - Manual (Page 12)

1
12 | About Your System
About Your System
Accessing System Features During Startup
The following keystrokes provide access to system features during startup.
Note that the hot-keys of SAS/SATA card or PXE support are available in
BIOS boot mode only. There is no hot-key to boot through the UEFI.
Keystroke Description
<F2> Enters the System Setup program. See “Start Menu” on page 62.
<F11> Enters the BIOS Boot Manager. See “Boot Manager” to select
boot device on page 63.
<F12> Starts Preboot eXecution Environment (PXE) / iSCSI boot.
<Ctrl><C> Enters the LSI 2008 SAS Mezzanine Card Configuration Utility.
For more information, see the SAS adapter documentation.
<Ctrl><H> Enters the LSI 9265-8i Card Configuration Utility. For more
information, see the documentation for your SAS RAID card.
<Ctrl><Y> Enters the MegaCLI SAS RAID Management Tool.
<Ctrl><S> Enters the utility to configure onboard LAN settings for PXE
boot. For more information, see the documentation for your
integrated LAN.
<Ctrl><I> Enters onboard SATA Controller’s Configuration Utility.
<Ctrl><D> Enter the Intel iSCSI setup menu.