Display assembly, Removing the display assembly – Dell Vostro 3300 (Early 2010) User Manual
Page 16
Back to Contents Page
Display Assembly
Dell™ Vostro™ 3300 Service Manual
Removing the Display Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
.
3.
Remove the
base cover
.
4.
Remove the
hard drive
.
5.
Remove the
optical drive
.
6.
Remove the
wireless local area newtork (WLAN) card
.
7.
Remove the
keyboard
.
8.
Remove the
wireless wide area network (WWAN) card
.
9.
Remove the
palm rest
.
10.
With the right side of the computer facing up, disconnect the display cable from the system board.
11.
Disconnect the camera cable.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.