Dell Dimension 4500C (Japan Only) - Manual (Page 21)

Setting Up 21
Attaching and Removing the Computer
Stand
To attach the stand:
HINT: Place your
computer on a soft
surface to prevent
scratching the top cover.
1 Rotate the computer to an upside-down position.
2 Insert the screw into the bottom of the stand.
3 Align the two tabs and the screw on the stand with the tab holes and
screw hole in the bottom of the computer.
4 Tighten the screw.
tabs (2)
tab holes (2)
screw screw hole