Dell Dimension 4500C (Japan Only) User Manual
Page 89
Adding Parts
89
Installing a Video Card
HINT: If you purchased
the optional video card,
ensure that you connected
your monitor cable to the
correct video connector.
NOTICE: You must use low-profile cards for your computer. A full-size card
can damage the computer or the card.
1
To add or replace the card, press the card lever toward the PCI
connector and gently press the card into the AGP connector until it
clicks into place.
2
Release the card lever, ensuring that the tab fits into the notch on the
front end of the card.
3
Secure the card by lowering the hinged lever on the back panel.
4
Close the computer cover (see page 92).
5
Attach the computer stand (see page 21).
NOTICE: To connect a network cable, first plug the cable into the network
wall jack and then plug it into the computer.
6
Connect your computer and devices to electrical outlets, and turn
them on.
back of computer
tab
card clip
lever
notch
PCI connector
AGP connector