Dell PowerEdge RAID Controller H800 - Manual (Page 114)

114 Configuring and Managing RAID
To enable Auto Import:
1 Press <Ctrl><N> to access the Ctrl Mgmt menu screen.
2 Press <Tab> to move the cursor to Enable Auto Import in the Settings
box.
3 Press the spacebar to select Enable Auto Import.
An X is displayed beside Enable Auto Import.
4 Press <Tab> to move the cursor to the Apply button, and then press
<Enter> to apply the selection.
The
Auto Import is enabled.
To disable Auto Import:
1 Use the spacebar to de-select Enable Auto Import.
2 Select Apply and press <Enter>.
The Auto Import is disabled.
Restoring Factory Default Settings
You can use the Ctrl Mgmt menu screen to restore the default settings for the
options in the Settings box. The settings are Enable Controller BIOS,
Enable BIOS Stop on Error, and Enable Auto Import. Perform the following
steps to restore default settings:
1 Press <Ctrl><N> to access the Ctrl Mgmt menu screen.
2 Press <Tab> to move the cursor to the Settings box.
3 Use the spacebar to de-select the settings for the options in the Settings
box.
4 Press <Tab> to move the cursor to the Factory Default box, and press the
<Alt>, <Enter>, or the spacebar.
A dialog box is displayed for you to confirm your choice.
5 Select <OK> and press <Enter>.
The defaults are automatically selected for the controller settings and are
displayed in Settings.
PERC7.2_UG.book Page 114 Thursday, March 3, 2011 2:14 PM