Replacing the system board – Dell Inspiron Zino (300, Late 2009) User Manual
Page 39
17.
Lift the system board away from the computer.
Replacing the System Board
1.
Follow the procedures in
Before You Begin
.
2.
Align the connectors on the system board with the slots on the chassis and slide the system board in place.
3.
Replace the four screws that secure the system board to the chassis.
4.
For Inspiron 400 Only:
a.
Replace the graphics-card fan (see
Replacing the Graphics-Card Fan
).
b.
Replace the graphics card (see
Replacing the Graphics Card
).
c.
Replace the graphics-card heat sink (see
Replacing the Graphics-Card Heat Sink
).
d.
Replace the processor (see
Replacing the Processor
).
e.
Replace the processor heat sink (see
Replacing the Processor Heat Sink
).
f.
Replace the Mini-Card (see
Replacing the Mini-Card
).
5.
Connect all the cables to the system board.
6.
Replace the memory module(s) (see
Memory Module(s)
).
7.
Replace the I/O bracket (see
Replacing the I/O Bracket
).
8.
Replace the chassis fan (see
Replacing the Chassis Fan
).
9.
Replace the I/O bezel (see
Replacing the I/O Bezel
).
10.
Replace the coin-cell battery (see
Replacing the Coin-Cell Battery
).
11.
Replace the drive bay (see
Replacing the Drive Bay
).
12.
Replace the optical drive (see
Replacing the Optical Drive
).
13.
Replace the bottom cover (see
Replacing the Bottom Cover
).
14.
Replace the top bracket (see
Replacing the Top Bracket
).
15.
Replace the top cover (see
Replacing the Top Cover
).
1
system board
2
screws (4)