So that you can restore the correct settings in, Step 8 – Dell Inspiron Zino (300, Late 2009) User Manual
Page 9
Advertising
5.
Replace the top bracket (see
Replacing the Top Bracket
).
6.
Replace the top cover (see
Replacing the Top Cover
).
7.
Connect your computer and devices to electrical outlets, and then turn them on.
8.
Enter the system setup utility (see
System Setup Utility
) and restore the settings you recorded in
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Advertising