Dell Inspiron 1300 User Manual
Page 96
96
Adding and Replacing Parts
3 Remove the two screws at the top of the keyboard.
NOTICE:
The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful
when removing and handling the keyboard.
4 Lift the keyboard, and hold it up and slightly forward to allow access to the keyboard connector on the
system board.
5 Lift the keyboard connector and slide out the keyboard cable.
NOTICE:
To avoid scratching the palm rest when replacing the keyboard, hook the tabs along the front edge of the
keyboard into the palm rest, and then secure the keyboard in place.
6 To replace the keyboard, connect the keyboard connector to the system board.
7 Place the tabs along the front edge of the keyboard into the palm rest and lay the keyboard down on
the palmrest.
8 Replace the two screws at the top of the keyboard.
9 Replace the hinge cover. See “
1
keyboard
2
system board connector
2
1
book.book Page 96 Thursday, September 22, 2005 8:08 AM