Replacing the media card reader – Dell Inspiron 580s (Late 2009) User Manual
Page 20
Advertising
Replacing the Media Card Reader
1.
Follow the procedures in
Before You Begin
.
2.
If this is a new Media Card Reader installation, remove the break-away metal plate. Align the tip of a Phillips screwdriver with the slot on the break-
away metal plate and rotate the screwdriver outwards to break and remove the metal plate.
3.
If not present, attach the two shoulder screws to the Media Card Reader.
1 securing tab
2 shoulder screws (2)
3 Media Card Reader (not present on all computers)
NOTE:
If you are replacing an existing Media Card Reader, remove the shoulder screws from the existing Media Card Reader and attach them to
the replacement Media Card Reader.
Advertising