Dell 5100cn Color Laser Printer - Manual (Page 161)

Characters have
jagged or uneven
edges.
· Change the Print Mode in the Graphics tab (or Advanced dialog box) to Standard in the
printer driver.
· If you are using downloaded fonts, verify that the fonts are supported by the printer, the host
computer, and the software program.
Part or all of the page
prints in black.
· Check the toner cartridge to make sure it is installed correctly.
The job prints, but the
top and side margins
are incorrect.
· Make sure the margins are set correctly in your software program.
Printing on both ends
of the transparencies
is faded.
· This occurs when the printer is operating in a location where relative humidity reaches 85% or
more. Adjust the humidity or relocate the printer to an appropriate environment.