Dell Alienware 17 (Mid 2013) - Manual (Page 50)

Removing the Memory Module(s) 1 and 2 | 50
Removing the Memory Module(s) 1 and 2
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Your computer supports up to four memory module connectors. You can access
connectors DIMM3 and DIMM4 are located under the base cover. DIMM1 and DIMM2 are
located under the keyboard.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 14.
2 Remove the battery. See "Removing the Battery" on page 16.
3 Remove the primary hard drive. See “"Removing the Primary Hard Drive" on page 21.
4 Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5 Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
6 Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
book.book Page 50 Friday, June 28, 2013 3:27 PM