Dell 922 All In One Photo Printer - Manual (Page 19)

G e t t i n g S t a r t e d 1 9
Print Media Guidelines for the Paper Support
Load up to: Make sure:
100 sheets of
plain paper • The paper is loaded vertically against the right side of the paper support.
• The paper guide rests against the left edge of the paper.
NOTE: Load letterhead paper with the top of the letterhead entering the
printer first and facing up.
• You select Draft (select Photo if a photo cartridge is installed), Normal, or
Photo print quality.
20 sheets of
banner paper • You remove any paper from the paper support before inserting banner
paper.
• You place a stack of banner paper on or behind the printer, with only the
number of sheets required.
NOTE: You must select A4 Banner or Letter Banner paper size in Print
Properties. Failure to do so will cause a paper jam. See "Paper Problems" on
page 55.
• You load the leading edge of the banner paper into the printer against the
right side of the paper support.
• You squeeze and slide the paper guide to the left edge of the banner paper.
• You use banner paper designed for inkjet printers.