Dell LCD TV W2600 - Manual (Page 21)

20
Setting Up Your TV
www
.dell.com | support.dell.com
4 Replace the back cover.
5 Plug in the power cords for the TV and devices and turn them on.
6 Enter the OSD and select DVI. See "Input Select Menu" on page 30.
Using VGA
You can use your TV as a computer monitor using a VGA connector
NOTE:
Only one connector can be used for a computer, either VGA or DVI.
1 Turn off the TV and unplug the power cord.
2 Remove the back cover from the TV by pulling the cover toward you and lifting it away.