Dell PowerVault 745N - Manual (Page 3)

Table A-1. System Board Jumper Settings
System Board Connectors
See Figure A -3 and Table A -2 for the location and description of the system board connectors.
Figure A-3. System Board Connectors
Table A-2. System Board Connectors
Jumper Setting Description
PASSWD
(default)
The password feature is enabled. You can set the password in System Setup only when the password feature is enabled. See
your User's Guide for information.
The password feature is disabled.
NVRAM_CLR
(default)
The configuration settings in NVRAM are retained at system boot.
The configuration settings in NVRAM are cleared at next system boot.
jumpered unjumpered
Connector Description