Sending a fax, Sending a quick fax – Dell 948 All In One Printer User Manual

Page 129

Advertising
background image

Faxing

file:///T|/htdocs/systems/prn948/en/en/d0e7047.html[10/10/2012 11:05:54 AM]

1. Connect a phone cord from the FAX connector ( —lower connector) on the printer to an active telephone wall jack.

2. Remove the blue protective plug from the PHONE jack connector ( —middle connector).

3. Connect a phone cord from the computer modem to the PHONE jack connector ( —middle connector).

4. Connect a phone cord from the computer modem to a telephone.

NOTE:

If phone communication is serial in your country (such as Germany, Sweden, Denmark, Austria, Belgium,

Italy, France, and Switzerland), you must remove the blue plug from the PHONE jack connector ( —middle
connector), and insert the supplied yellow terminator for your fax to work correctly. You will not be able to use

this port for additional devices in these countries.

Sending a Fax

Sending a Quick Fax

Using the Operator Panel

1. Make sure your printer is properly set up to send and receive faxes. For more information, see

Setting Up the Printer

With External Devices

.

2. Load the original document. For more information, see

Loading Original Documents

.

3. Use the left and right Arrow buttons to scroll to FAX, and then press the Select button

.

4. Use the keypad to enter a fax number or a speed dial number.

5. Press the Start button .

Using Your Computer

1. Turn on your computer and printer, and make sure they are connected.

2. Make sure your printer is properly set up to send and receive faxes. For more information, see

Setting Up the Printer

With External Devices

.

Advertising