Coin-cell battery, Removing the coin-cell battery, Replacing the coin-cell battery – Dell Inspiron 1122 (M102z, Early 2011) User Manual

Page 12

Advertising
background image

Back to Contents Page

 

Coin-Cell Battery

Dell Inspiron 1122 Service Manual

  

Removing the Coin-Cell Battery

  

Replacing the Coin-Cell Battery

 

Removing the Coin-Cell Battery

 

1.

Follow the instructions in

Before You Begin

.


 

2.

Remove the battery (see

Removing the Battery

).


 

3.

Remove the keyboard (see

Removing the Keyboard

).


 

4.

Follow the instructions from

step 4

to

step 6

in

Removing the Hard Drive

.


 

5.

Remove the palm rest (see

Removing the Palm Rest

).


 

6.

Use a plastic scribe and gently pry the coin-cell out of the battery socket on the system board.

 

7.

Lift the coin-cell battery out of the battery socket.

 

Replacing the Coin-Cell Battery

 

1.

Follow the instructions in

Before You Begin

.


 

2.

With the positive side up, snap the coin-cell battery into the battery socket on the system board.

 

3.

Replace the palm rest (see

Replacing the Palm Rest

).


 

4.

Follow the instructions from

step 5

to

step 7

in

Replacing the Hard Drive

.


 

5.

Replace the keyboard (see

Replacing the Keyboard

).


 

6.

Replace the battery (see

Replacing the Battery

).

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is

not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Removing the Battery

) before working inside the

computer.

1 coin-cell battery

2 plastic scribe

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

Advertising