Audio board, Removing the audio board, Replacing the audio board – Dell Inspiron 1122 (M102z, Early 2011) User Manual
Page 4
Back to Contents Page
Audio Board
Dell Inspiron 1122 Service Manual
Removing the Audio Board
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the keyboard (see
Removing the Keyboard
).
4.
Follow the instructions from
step 4
to
step 6
in
Removing the Hard Drive
.
5.
Remove the palm rest (see
Removing the Palm Rest
).
6.
Disconnect the Mini-Card antenna cables from the Mini-Card(s).
7.
Disconnect the audio cable from the connector on the audio board.
8.
Remove the three screws that secure the audio board to the computer base.
9.
Lift the audio board out of the computer base.
Replacing the Audio Board
1.
Follow the instructions in
Before You Begin
.
2.
Align the connectors on the audio board with the slots on the computer base.
3.
Replace the three screws that secure the audio board to the computer base.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
screws (3)
2
audio board
3
audio cable connector