Removing the computer cover – Dell OptiPlex 160L User Manual
Page 16
Back to Contents Page
Removing the Computer Cover
Dell™ OptiPlex™ 160L Service Manual
1.
Shut down the computer through the Start menu.
2.
Ensure that your computer and attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut
down your computer, turn them off now.
3.
Disconnect any telephone or telecommunication lines from the computer.
4.
Disconnect your computer and all attached devices from their electrical outlets, and then press the power button to ground the system board.
5.
Lay your computer on its side with the computer cover facing up.
6.
While keeping the cover latch in the open position, grip the indents and slide the computer cover toward the back of the computer.
7.
Place the computer cover on a level surface.
Back to Contents Page
CAUTION:
Before you perform this procedure, see the safety instructions in your Setup and Quick Reference Guide.
NOTICE:
To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
1 computer cover
2 cover latch