Dell OptiPlex 160L - Manual (Page 4)

Back to Contents Page
Replacing the Computer Cover
Dell™ OptiPlex™ 160L Service Manual
1. Ensure that all cables are connected, and fold cables out of the way.
2. Ensure that no tools or extra parts are left inside the computer.
3. Place the cover on the computer.
4. Slide the cover toward the front of the computer until it fits completely into place.
3. Connect your computer and any devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION: Before you perform this procedure, see the safety instructions in your Setup and Quick Reference Guide.
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.