Dell 1710/n Mono Laser Printer - Manual (Page 93)

The operator panel lights do not come on when the printer is turned on.
Wait to see if the lights come on. This may take a few seconds.
Make sure the power cord is firmly plugged in at the back of the printer and at the
electrical outlet.
Pages are blank.
The toner cartridge may be out of toner. Replace the cartridge. See Replacing the Toner
Cartridge for more information.
You may have a software error. Try turning the printer off and back on.
The printer is on, but nothing prints
Make sure the toner cartridge is installed.
Make sure the parallel, USB, or network cable is firmly plugged into the connector on the
back of the printer.
Press and release Continue to print a menu settings page to determine if the
problem is with the printer or the computer.
If you can print a menu settings page, the problem is in the computer or the software
program.
If you cannot print a menu settings page, contact Dell at support.dell.com.
You cannot close the front cover.
Make sure the toner cartridge is positioned correctly.
The printer has missing or damaged parts.
Contact Dell at support.dell.com.
Clearing paper jams
When a paper jam occurs, the printer stops and the operator panel's Paper Jam and
Continue lights come on. Press and release Continue twice quickly to display the
specific secondary error paper jam light sequence.
We recommend that you clear the entire paper path when a paper jam occurs.
To clear a paper jam:
If you are feeding paper from a tray, remove the tray, and then remove any jams. 1.
2.