Display assembly bezel and panel, Inch display bezel – Dell Inspiron 2500 User Manual
Page 22
Advertising
1.
Remove the
2.
Remove the 6-mm screws that secures the flex cable to the strain relief, and then use the pull loop to remove the flex cable from the system board.
3.
Open the display and remove the two screws (marked with a "circle D") that secure the display assembly to the bottom case assembly.
4.
With the display in an upright position, lift the display assembly from the bottom case assembly.
Display Assembly Bezel and Panel
12.1-Inch Display Bezel
NOTICE:
When reconnecting the flex cable, press down on both ends of the connector, not in the middle. Pressing the middle of the connector can
damage fragile components.
Advertising