Microprocessor module – Dell Inspiron 2500 User Manual
Page 29
Removing the Microprocessor Thermal Cooling Assembly
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Remove the
3.
Remove the
4.
Insert a pry stick into the latch mechanism at the left side of the microprocessor retaining clip, and pry open the clip.
5.
Lift out the thermal cooling assembly.
Microprocessor Module
NOTICE:
Disconnect the computer and attached devices from electrical outlets and remove any installed battery.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface on the computer.
NOTICE:
To ensure maximum cooling for the microprocessor, do not touch the heat transfer areas on the thermal cooling assembly. The oils in your skin
reduce the heat transfer capability of the thermal pads.