Dell 946 All In One Printer - Manual (Page 47)

a.
When the computer you want to scan to appears on the display, press the Select button . b.
If the computer has a PIN number associated with it, use the keypad to enter the four-digit PIN. c.
NOTE: This can be found in the upper-right corner of the Dell All-In-One Center main page. For more
information, see Using the Dell All-In-One Center . The PIN is not required by default; it is only
requested if the PIN has been set.
Press the Select button . d.
Press the Start button . 6.
The printer scans the page. When the scan is complete, a file is created in the selected application.
Using Your Computer
Turn on your computer and printer, and make sure they are connected. 1.
Load your original document. For more information, see Loading Original Documents . 2.
Click Start Programs or All Programs Dell Printers Dell AIO Printer 946. 3.
Select Dell All-In-One Center. 4.
The Dell All-In-One Center opens.
NOTE: You can also open the Dell All-In-One Center from the operator panel on your printer. When
your printer is in Scan mode, press the Start button . The Dell All-In-One Center opens.
From the Send scanned image to: drop-down menu, select the program you want to use. 5.
NOTE: If the program you want to use is not listed, select Search for more... in the drop-down
menu. On the next screen, click Add to locate and add the program to the list.
Click See More Scan Settings to customize your scan. 6.
When you finish customizing your settings, click Scan Now. 7.
When the printer completes scanning document or image, a file containing is created in the selected
application.
Scanning Multiple-Page Documents Using the ADF