Dell Latitude E4300 (Late 2008) - Manual (Page 20)

Removing the Display Hinges
1. Follow the instructions in What You Need to Know For Your Safety .
2. Remove the display assembly (see Removing the Display Assembly ).
3. Remove the display bezel (see Removing the Display Bezel ).
4. Remove the four M2.5 x 5-mm screws (two per side) that secure the display hinges to the display back cover.
5. Free the hinges from the display cable (left side) and display antenna cables (right side).
Removing the Display Panel
1. Follow the instructions in What You Need to Know For Your Safety .
2. Remove the display assembly (see Removing the Display Assembly ).
3. Remove the display bezel (see Removing the Display Bezel ).
4. Remove the four M2 x 3-mm screws securing the display brackets (two on each side of the display panel).
5. Gently remove each bracket by pulling it away from the display.
1 hinges (2) 2 M2.5 x 5-mm screws (4)
1 display panel brackets (2) 2 M2 x 3-mm screws (4)
3 display panel