Configuring snmp v3, Rmation, see – Dell 7130cdn Color Laser Printer User Manual
Page 56
Security Features
Dell 7130cdn Professional Color Printer
System Administrator Guide
56
Configuring SNMP v3
When configuring SNMP v3, you can set up:
•
Administrative, Key, Any User, and Driver accounts with Privacy and Authentication Keys
associated with each account.
•
SNMP user read and write access.
•
An ColorTrack list that limits SNMP printer access to the specific hosts. See
To configure and enable SNMP v3:
1. Launch your Web browser.
2. Enter the printer’s IP address in the browser Address field. For details, see
3. Click Properties.
4. On the left navigation pane, select the Protocols folder.
5. Select SNMP.
6. If prompted, enter your Admin or Key User name and password.
7. On the SNMP Configuration page, click the Configure SNMP v3 button.
8. Click the Configure Account(s) button. A series of pages displays that enable you to
configure SNMP v3 and the Administrative User, Key User, and Any User/Driver settings.
The first page displays Administrative User account information after the account has been
created.
9. Do one of the following:
•
To create the Administrative User account and to enable SNMP v3, enter a user name or
accept the default name admin, then click the Create button.
•
To configure the Key User and other account settings, click the Next button.
•
To delete the Administrative User account and disable SNMP v3, click the Delete button.
Note:
Deleting the Administrative User account and disabling SNMP v3 also deletes all other
accounts, including the Key User and Any User settings.
Administrative User Account Settings
•
User Name: The Administrative User account name defined on the Configure SNMP v3:
Administrative User Account page.
•
Authentication Protocols: The protocol associated with the Authentication Key; selected on
the Configure SNMP v3: Administrative User Account page.
•
Authentication Key: The Authentication Key defined on the Configure SNMP v3:
Administrative User Account page is displayed as a row of asterisks (*) here.
•
Privacy Protocol: The protocol associated with the Privacy Key; selected on the Configure
SNMP v3 Administrative User Account page.
•
Privacy Key: The Privacy Key defined on the Configure SNMP v3: Administrative User
Account page is displayed as a row of asterisks (*) here.
•
MIB Access: The Administrative User account’s MIB access permissions, which are set to
Read/Write by default.