Replacing the power-status light board, Procedure, Post-requisites – Dell Inspiron 15 (7548, Late 2014) User Manual
Page 35
Advertising
Replacing the Power-Status
Light Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the power-light board with the screw holes on
the palm-rest assembly.
2 Replace the screws that secure the power-light board to the palm-rest
assembly.
3 Connect the power-light board cable to the power-light board and press
down on the latch to secure the cable.
Post-requisites
1
Replace the
2 Replace the
35
Advertising