Replacing the display assembly, Procedure, Post-requisites – Dell Inspiron 15 (7548, Late 2014) User Manual
Page 52
Replacing the Display
Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Place the palm-rest assembly on the edge of a table with the keyboard
facing down.
2 Align the screw holes on the hinges of the display assembly with the
screw holes on the palm-rest assembly.
3 Replace the screws that secure the display assembly to the palm-rest
assembly.
4 Close the display.
5 Route the display cable and connect it to the system board
6 Route the antenna cables and connect them to the wireless card.
Post-requisites
1
Replace the
2 Replace the
52