Dell B3460dn Mono Laser Printer - Manual (Page 4)

Configuring Background and Idle Screen
Adding Background and Idle Screen images
When selecting images to include for the home screen background or idle screen, resize or crop the source images to
the size you want before use. The application does not resize or crop images automatically.
Maximum file sizes and supported file types vary by printer model. For more information, see the mouse
‑over help in
the Embedded Web Server.
1 Access the application configuration settings from the Embedded Web Server.
2 Under Idle Screen Images, click Add.
Note: You can also edit and delete existing images.
3 Type an image name, and then upload the file you want to use.
Note: Make sure to upload an image when adding an idle screen image entry. An idle screen image entry with
no image attached will not be displayed.
4 Click Apply.
5 Repeat step 2 through step 4 to add more idle screen images. You can add up to ten images.
6 Under Idle Screen Settings, make sure Enable is selected, and then adjust the settings as necessary.
7 Under Home Screen Background, make sure Enable is selected.
8 Select one of the default images, or select Custom, and then upload the file you want to use.
9 Click Apply.
Showing printer information on the idle screen
1 From the Embedded Web Server, click Settings or Configuration, and then click General Settings > Displayed
Information.
2 Set the information you want to appear on the printer home screen.
3 Access the application configuration settings from the Embedded Web Server.
4 Under Idle Screen Settings, select Enable Displayed Information.
5 Save or discard your changes.
Showing the Status/Supplies button on the idle screen
1 Access the application configuration settings from the Embedded Web Server.
2 Under Idle Screen Settings, select Enable Status/Supplies.
3 Save or discard your changes.
Configuring Background and Idle Screen 4