Dell OptiPlex Gxi - Manual (Page 50)

Removing and Replacing Parts on the Low-Profile Systems
This section provides procedures for removing the components, assemblies, and subassemblies in the OptiPlex GXi midsize computer.
Unless otherwise noted, each procedure assumes the following:
l You have performed the steps in Precautionary Measures.
l You have removed the computer cover.
l You can replace or reinstall a part by performing the removal procedure in reverse order unless additional information is provided.
Recommended Tools
Precautionary Measures
Computer Cover Removal
Eject-, Power, and Reset-Button Removal
Front-Panel Insert Removal
Control Panel Removal
Drive Hardware
System Power-Supply Removal
Expansion-Card Cage Removal
Expansion-Card Removal
Riser Board Removal
SIMM Removal and Installation
Video-Memory Chip Removal
Microprocessor Removal
System Battery Removal
System Battery Removal
System Board Removal