Dell OptiPlex Gxi User Manual
Page 81
Advertising
Microprocessor Removal (Mini Tower Chassis): OptiPlex GXi
|
New Microprocessor and Heat Sink Assembly
Microprocessor Removal
1. Remove the microprocessor securing clip from the microprocessor/heat sink assembly. Then release the heat sink from the microprocessor chip by pressing
down on the folded part of the clip with a small screwdriver.
2. Push outward and then upward on the microprocessor-socket release lever to rotate the lever to its fully vertical position.
3. Lift the microprocessor chip out of its socket.
New Microprocessor and Heat Sink Assembly
WARNING: The microprocessor/heat sink assembly can get extremely hot during system operations. Be sure the assembly has
had sufficient time to cool before touching it.
Advertising