Dell Latitude C600 - Manual (Page 54)

54 Removing and Replacing Parts
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m
Re m o v i n g t h e S y s t e m B o a r d A s s e m b l y S c r e w s
Removing the System Board
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by periodically touching an unpainted metal on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing
the following procedure.
1 Remove the hard drive.
2 Remove the keyboard assembly.
3 Remove the display assembly.
4 Remove the palmrest assembly.
5 Remove the thermal cooling assembly.
6 Remove the microprocessor.
7 Verify that all PC Cards or plastic blanks are removed from the PC
Card slot.
M2.5 x 5-mm
screws (9)
fan guard